Since the miniserver has only a SD-card as internal storage and it’s prone to wear I’m thinking about logging of data outside the miniserver. Loxone offers so called loggers. One possibility is to set the storage location to a syslog target outside the miniserver. so now the data is in /var/log/syslog of alix.
What I need next is a possibility to store the data over a long time and a possibility to display it.
Possibilities I see:
- Do everything on my own
Since #1 means work and maintenance and #2 & #3 mean quite a big installation on a small system I’m very open to suggestions of something in between.
When building a house of course the question comes up whether, and immediately after that, how much home automation should be implemented. First step after deciding that I want home automation was the selection of a system. I decided to use loxone. There are reasons:
- One of my friends already has some experience with the system
- The system is centralized, so in case it has to be replaced it can be done in that central place and no hardware updates are required in the living room. The centralized solution also allows to set up a backup system that provides basic functionality like switching of light and opening/closing of roller blinds.
- The company delivers the configuration software with the hardware without additional costs and conditions. If I want to update anything in the future I can do that. If I want to stick with an old version of their software I can stick with that.
The home automation has the goal to be invisible for the user and offer all the functionality that you’re used to in a “normal” home as a base. If you enter a room there shall be a switch that will turn on the light if pressed. Only if you want to you can dim the light by holding the switch or by double clicking.
Also the basic setup should look the same in all the rooms. So I’ve decided for a combination of a normal sized light switch and a 6 pin switch below it.
Details will follow.
The mechanical part of the house already exists: